Peltier-Cooled Incubators

The most important advantages of incubators with ILP Peltier modules are:

  1. No vibrations – through the use of Peltier cells, vibrations previously generated by the compressor are eliminated
  2. Fluctuation and variation – the cooling system based on Peltier cells allows to achieve excellent fluctuation and variation additionally the time of reaching the set temperature, e. g. after opening the door, is much shorter
  3. Lighter and smaller design – Peltier cell cooling system reduces the size of the device and its weight
  4. Environmentally friendly – removing the compressor eliminates the use of refrigerant gases that have a negative impact on the environment

All Peltier-cooled laboratory incubators are equipped with an internal glass door to facilitate viewing of the load during the process (optionally, the unit may have an external door with a vision window so that processes can be observed without opening the door, as long as the research being conducted allows light to enter the chamber).

  • Applications:

    • Innovative and ecological incubators ILP with cooling system based on the Peltier cell technology.
    • Alternative to ILW Cooled Incubators
  • Cabinet Variants:

    • Manufactured in 4 sizes, from 56 to 749 litres. They are available in Smart and Smart PRO controller versions.
Peltier-Cooled Incubators
PELTIER-COOLED INCUBATOR ILP 53

PELTIER-COOLED INCUBATOR ILP 53

PELTIER-COOLED INCUBATOR ILP 115

PELTIER-COOLED INCUBATOR ILP 115

PELTIER-COOLED INCUBATOR ILP 240

PELTIER-COOLED INCUBATOR ILP 240

PELTIER-COOLED INCUBATOR ILP 750

PELTIER-COOLED INCUBATOR ILP 750

Reliable. Customisable. Quality Assurance.

RS-Simulation Asia uses only original spare parts and all functions are tested against our stringent quality specifications.

  • We provide both natural and artificial environment simulations such as temperature, humidity, vibration, thermal shock, battery test and more.
  • Accredited calibration laboratory with MS ISO/IEC17025:2017 (SAMM 975)
  • On-site calibration of climatic test chambers based on methods such as Guideline DKD-R-5-7.
  • Customisable chamber module solutions to meet clients’ specific requirements.
  • 3S (sales, service, spare parts) facility centre is based in Puchong, Malaysia to provide maximum supports and to achieve greater customer satisfaction.

RS-Simulation Asia Sdn Bhd (Reg No: 637594-D)
Copyright © 2003-. All Rights Reserved. Sitemap