Laboratory Sterilizers

Hot-air sterilizers have been equipped with a couple of additional functions that protect samples.

They can sterilize at temperatures of up to 250°C.

  • Applications:

    • Ready-to-use sterilization programs also for N95 and FFP2 Masks
  • Cabinet Variants:

    • with Natural Air Convection
    • with Forced Air Convection
Laboratory Sterilizers

WITH NATURAL AIR CONVECTION

Natural air circulation sterilizers are available in 3 sizes 56, 112 and 245 liters capacity.

These units are only available with a Smart controller that has 3 preloaded sterilization programs.

The appliance door is automatically locked during sterilization. They can only be unlocked at the end of the sterilization program or, if necessary, after it has been stopped manually. At the same time as the door locks, the ventilation chimney is closed.

LABORATORY STERILIZER SRN 53

LABORATORY STERILIZER SRN 53

LABORATORY STERILIZER SRN 115

LABORATORY STERILIZER SRN 240

LABORATORY STERILIZER SRN 240

WITH FORCED AIR CONVECTION

The forced air sterilizers are available in 6 chamber sizes from 56 to 1005 liters capacity.

Laboratory sterilizers are designed to sterilize with hot air the elements used in everyday work in the laboratory.

They are also perfect for unusual applications such as sterilization and disinfection of documents or masks.

Dedicated stainless steel racks are available for sterilization of masks (both surgical and FFP2/FFP3 or N95) and documents or books.

LABORATORY STERILIZER SRW 53

LABORATORY STERILIZER SRW 53

LABORATORY STERILIZER SRW 115

LABORATORY STERILIZER SRW 115

LABORATORY STERILIZER SRW 240

LABORATORY STERILIZER SRW 400

LABORATORY STERILIZER SRW 400

LABORATORY STERILIZER SRW 750

LABORATORY STERILIZER SRW 750

LABORATORY STERILIZER SRW 1000

Reliable. Customisable. Quality Assurance.

RS-Simulation Asia uses only original spare parts and all functions are tested against our stringent quality specifications.

  • We provide both natural and artificial environment simulations such as temperature, humidity, vibration, thermal shock, battery test and more.
  • Accredited calibration laboratory with MS ISO/IEC17025:2017 (SAMM 975)
  • On-site calibration of climatic test chambers based on methods such as Guideline DKD-R-5-7.
  • Customisable chamber module solutions to meet clients’ specific requirements.
  • 3S (sales, service, spare parts) facility centre is based in Puchong, Malaysia to provide maximum supports and to achieve greater customer satisfaction.

RS-Simulation Asia Sdn Bhd (Reg No: 637594-D)
Copyright © 2003-. All Rights Reserved. Sitemap